GEPRC MATEN 4.9G 2.5W VTX PRO
| System | analog |
|---|---|
| Max power | 2500 mW |
| Power levels | 25 / 200 / 600 / 1600 / 2500 mW |
| Frequency range | 4990-5200 MHz |
| Band | 4.9 GHz |
| Input voltage | 7-36V (2-8S) |
| Mounting | 20x20mm M2 / 30.5x30.5mm M2 |
| Channels | 8 |
| Antenna connector | MMCX |
| Weight | 20 g |
Where to buy
Search “GEPRC MATEN 4.9G 2.5W VTX PRO” on AliExpress →Affiliate link: FPV-DB may earn a commission from qualifying purchases, at no extra cost to you. It has no influence on which parts are listed or on their specs. The link opens a shop search, not a verified listing — check the seller's specs against the table above before buying.
GEPRC MATEN 4.9G 2.5W VTX PRO VTX table for Betaflight
The band and channel frequencies and power levels as GEPRC publishes them for IRC Tramp control. Paste the CLI commands into Betaflight's CLI tab, or load the JSON file in Betaflight Configurator's Video Transmitter tab. How it works: setting up a VTX table in Betaflight.
| Band | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| X X | 4990 | 5020 | 5050 | 5080 | 5110 | 5140 | 5170 | 5200 |
Frequencies in MHz; "—" is an unused slot. Power levels: 25 (value 25), 200 (value 200), 600 (value 600), 1W6 (value 1600), 2W5 (value 2500).
vtxtable bands 1
vtxtable channels 8
vtxtable band 1 X X CUSTOM 4990 5020 5050 5080 5110 5140 5170 5200
vtxtable powerlevels 5
vtxtable powervalues 25 200 600 1600 2500
vtxtable powerlabels 25 200 600 1W6 2W5
saveSource: https://geprc.com/wp-content/uploads/2025/07/MATEN-4.9G-2.5W-VTX-PRO-IRC-Tramp.txt — GEPRC's own CLI dump, published twice (2024/03 and 2025/07, byte-identical), and the same single row is printed as the "图传频率表" (frequency table) on page 4 of the V1.0 manual - every cell read off the PDF and diffed against the file. One band of eight is the whole radio: 4990-5200 MHz in 30 MHz steps, the band X that Foxeer's wideband files publish with the same eight frequencies. The five power values are the manual's "25mW/200mW/600mW/1600mW/2500mW/Pit mode" output-power line; Pit mode is a button mode, not a level. Transmitting is only legal on the frequencies and power your country allows; see VTX frequency bands.
Choosing between systems? See analog vs DJI vs Walksnail vs HDZero.
Where this data comes from
Read 2026-10-06 off GEPRC's own manual, the first MATEN this catalogue carries that geprc.com sells no product page for: it is in neither product-sitemap.xml nor the WooCommerce product list, so every figure here comes from the V1.0 manual PDF in the media library (MATEN4.9G-2.5W-VTX-PRO说明书.pdf, uploads/2025/04). Spec-block lines, paired by their position on the page: '产品名称 (product name): MATEN 4.9G 2.5W VTX PRO', '输出功率 (output power): 25mW/200mW/600mW/1600mW/2500mW/Pit mode', '频率 (frequency): 4990-5200MHz', '频道数 (channels): 8CH', '输入电压 (input voltage): DC7-36V（2-8S Battery）', '安装孔位 (mounting): 20x20mm(M2)、30.5x30.5mm(M2)', '天线接口 (antenna connector): MMCX', '控制协议 (protocol): IRC Tramp', '外尺寸 (dimension): 36.3x36.3x15.1mm', '重量 (weight): 20克' (20 g; the manual states no output-stage-only figure). 输出电压 5V@600mA is the camera rail. The five output-power steps are exactly the five powervalues of the maker's CLI dump, which the manual's own QR link (https://geprc.com/maten-4-9g-2-5w-vtx-pro-irc-tramp/, a 301 to the file) points at; Pit mode is a button mode and not a power level. One band of eight channels, 4990-5200 MHz, is the whole radio - see the VTX table.