iFlight BLITZ 25mW Race VTX
| System | analog |
|---|---|
| Max power | 25 mW |
| Frequency range | 5.8 GHz |
| Input voltage | 7-26V |
| Mounting | 30.5x30.5mm / 20x20mm |
| Channels | 8 |
| Antenna connector | U.FL |
Choosing between systems? See analog vs DJI vs Walksnail vs HDZero.
Where this data comes from
iFlight's product page prints the labelled block: Item: BLITZ RACE 25mW VTX, Input voltage: DC 7-26V, Volts input: 2-6S, LED lamp output voltage 5V current 2A, Fixed transmitting power: 25mW(14dbm), Antenna connector: IPEX, VTX input connector: SH0.8 4P, LED connector: SH0.8 3P. power_levels_mw is deliberately empty: this radio has no selectable power, and both the block and the feature list call the figure fixed - so max_power_mw here is the only power the board has, not the top of a list. channels is the manual's own frequency table (B015949_BLITZ RACE 25mW VTX Instructions_20241030.pdf), which prints ONE band - RACE, CH1-CH8, 5658-5917 MHz - and whose LED legend says the channel is 'cycled in RACE BAND 1-8CH'; the product page states no channel count at all, and this is the only transmitter in this column locked to a single band. mount_mm is the page's own 'Double mounting holes: 30.5*30.5mm / 20*20mm'. antenna_connector is normalised to the column's U.FL spelling; iFlight writes IPEX in the block and 'iPex/UFL' in the same page's packing list ('1 x iPex/UFL to M2 SMA F Adapter Cable'), which is the same connector. weight_g is empty: neither the page nor the manual states one. The board carries an LED-strip controller (5V 2A output on an SH0.8 3P connector), which is why it also has a colour button.